Products & Solutions
CONTACT US
+86-138 6780 0831
jacky@flonpro.com
No. 88, Meiyuan Industrial Zone, Yinjiang Town, Haishu District, Ningbo, Zhejiang, China
Component sourcing · Concrete vibration Concrete vibrator motor components: the five parts that decide whether a pour finishes on time Heads get blamed, motors get replaced, and the real fault usually sits in a coupling, a shaft core or a bearing that was never specified. This is the component checklist that keeps a ...
READ MORECORDLESS IMPACT WRENCHES · BUYER'S FIELD GUIDE Cordless Impact Wrenches: Match Torque to the Job, Not the Hype A practical guide for repair shops, distributors, and product teams choosing between compact 21V tools and high-torque nut-busting models. The fastest way to choose a cordless impact wrench is to start with ...
READ MORESourcing Cordless Power Tools: What Separates a Factory From a Reseller Battery platform, torque ladder, and regional couplings decide whether a container sells through or sits in the warehouse. Picture a first order: 500 brushless impact wrenches, 200 drills, and chargers for a 21V platform, all packed and shipped. T...
READ MORENingbo Tongque Machinery Manufacturing Co., Ltd. (FLONPRO) is an export-oriented Concrete Vibrator Poker Shaft manufacturer with 15 years of experience in power tools and concrete equipment. We supply a complete line of poker shafts for internal concrete vibration, covering the most common regional coupling and pin-type interfaces used in Malaysia, Indonesia, Korea, Japan, and China. Our shafts are designed for reliable consolidation of fresh concrete in precast yards, bridge decks, foundation work, columns, beams, and slabs. Every shaft is produced in our 10,000 m² facility near Ningbo Port, with end-to-end quality control from raw material inspection to final assembly. We support OEM and ODM projects, and we prepare each proposal based on the working point, material, and production target.
We offer six established poker shaft configurations, each matched to a specific drive-unit interface and regional practice. The table below summarises the range and typical application.
| Type | Coupling / Interface | Typical Head Diameter | Primary Market |
|---|---|---|---|
| Malaysian 2 Claw Type | Two-claw coupling | 25–50 mm | Malaysia, Singapore |
| Portable Concrete Vibrator Poker Shaft | Universal quick-fit | 25–38 mm | Global / general construction |
| Indonesian Type | Pin or claw (market-specific) | 32–45 mm | Indonesia |
| Korean Pin Type | Pin-type connector | 25–38 mm | South Korea |
| Japanese Pin Type | Pin-type with hose | 25–38 mm | Japan |
| Chinese Type Internal Poker | Threaded or pin | 25–50 mm | China, Southeast Asia |
Concrete vibrator poker shafts are selected primarily by head diameter, shaft length, and coupling type. The head diameter determines the radius of action and the maximum aggregate size that can be consolidated. For standard structural concrete with 20–40 mm aggregate, a 38 mm head is common; for congested reinforcement or thin sections, 25–32 mm heads provide better access. Shaft length is matched to the depth of the pour, typically 2–6 m. We supply shafts with flexible hose and inner core cable that transmit vibration from the drive unit to the poker head without excessive heat build-up.
We configure each poker shaft assembly to match the drive unit (electric motor, gasoline engine, or high-frequency converter) and the site’s coupling standard. For automated precast lines, we can integrate the shaft with a fixed mounting bracket and quick-disconnect coupling to reduce changeover time. The shaft is balanced at the factory to minimise operator fatigue and bearing wear. We do not supply the drive unit as part of this category, but we can recommend compatible units from our Concrete Vibrator Shafts range or the Portable Concrete Vibrator category.
Installation is straightforward: connect the shaft coupling to the drive unit, secure the hose clamp, and verify free rotation of the core before first use. Acceptance testing includes a no-load run for 2 minutes to check vibration amplitude and noise level. We recommend greasing the core every 50 operating hours and inspecting the hose for cuts or abrasion. Spare parts (core cables, hoses, couplings, heads) are available for all types.
Every shaft undergoes in-process inspection of the core wire tension, hose thickness, coupling fit, and final vibration test. Our quality system covers incoming raw material (steel, rubber, couplings) and finished product performance. We comply with CE and relevant international safety standards for construction equipment. Documentation includes material certificates, test reports, and a packing list.
To prepare a precise quotation and shaft configuration, we need the following project data:
Q: What is the typical lead time for a custom poker shaft order?
A: For standard types (Malaysian, Indonesian, Korean, Japanese, Chinese), lead time is 15–25 days after order confirmation, depending on quantity and material availability. Custom lengths or special couplings may add 5–10 days.
Q: Can you supply poker shafts with a different hose colour or branding?
A: Yes. We offer OEM and ODM services. You can specify hose colour, imprint your brand logo on the hose or coupling, and choose custom packaging. Minimum order quantities apply for custom branding.
Q: Do you test each shaft before shipment?
A: Every shaft is run-tested for vibration amplitude, noise, and coupling fit. A sample test report can be provided with the shipment. We also retain batch samples for traceability.
Q: What is the maximum shaft length you can produce?
A: We can produce shafts up to 8 metres in one piece. Longer lengths can be supplied with intermediate couplings. Please confirm the required length when requesting a quote.
Q: Which drive units are compatible with your poker shafts?
A: Our shafts are compatible with most electric vibrator motors, gasoline engines, and high-frequency converters. We can also supply matching drive units from our Concrete Vibrator Shafts and Portable Concrete Vibrator lines. If you have an existing drive, please provide the coupling dimensions and we will confirm fit.
Our portfolio also includes Products for applications with different operating ranges, interfaces or integration requirements.